S10 Carbide Drawing Die for Non-Ferrous Metal Wire

Introduction

S10 carbide drawing dies for non-ferrous metal wires are widely used to reduce cross section of non-ferrous metal wires. Besides, carbide wire drawing dies can stretch metal wires whose cross sections are round, square, hexagon, octagon, etc. Drawn non-ferrous wires, such as tungsten wires, molybdenum wires, alloy wires, etc., are widely used in electrical devices, radars, television sets, gauges, and so on.

Features

1. S10 carbide drawing dies for non-ferrous metal wires are featured by long working life, strong toughness, superior wear resistance, etc.
2. Custom drawing dies can be manufactured in compliance with specific design drawings.
3. Various types are offered as options.

Notes and Delivery

1. Before purchase, inform us of particular model numbers or what wire materials are. Then, we can assist you in choosing right S10 carbide drawing dies for non-ferrous metal wires.
2. With physical prototypes, we can manufacture custom carbide wire drawing dies in 15 days. But if there is no physical prototype, 25 days are needed.
3. Cargos are in fiber board cases if they are transported by ship, and in cartons if transported by air.
4. Payment is through T/T or L/C.

Parameters

New Type	Old Type	Dimension (mm)					Reference Dimension (mm)
		D	H	d	2α	2γ	h	h1	R	e
S10-0060440-0.3	S10-0.3	6	4	0.3	40°	60°	0.6	0.8	1.5	0.5
S10-0060440-0.4	S10-0.4	6	4	0.4	40°	60°	0.6	0.8	1.5	0.5
S10-0060440-0.6	S10-0.6	6	4	0.6	40°	60°	0.8	0.8	1.5	0.5
S10-0060440-0.7	S10-0.7	6	4	0.7	40°	60°	0.9	0.8	1.5	0.5
S10-0060440-0.8	S10-0.8	6	4	0.8	40°	60°	1.0	0.8	1.5	0.5
S10-0080640-0.3	LS10-0.3-8	8	6	0.3	40°	60°	0.2	1.0	2.0	0.5
S10-0080640-0.4	LS10-0.4-8	8	6	0.4	40°	60°	0.4	1.0	2.0	0.5
S10-0080640-0.6	LS10-0.6-8	8	6	0.6	40°	60°	0.6	1.0	2.0	0.5
S10-0080640-0.8	LS10-0.8-8	8	6	0.8	40°	60°	0.8	1.0	2.0	0.5
S10-0080640-1.0		8	6	1.0	40°	60°	1.0	0.6	2.5	0.5

TallKee Cemented Carbide is a specialist manufacturer dedicated in production of superior cemented carbide dies. Our tungsten carbide dies, including type S10 carbide drawing dies for non-ferrous metal wires, are commonly used in iron industry and steel industry. They are inspected under strict quality tests and have passed ISO9001:2000. These carbide wire drawing dies are exported to many areas, including North American countries, Japan, Korea, India, Taiwan, Southeast Asia, etc.