R5 Carbide Drawing Die for Metal Wires

Introduction

R5 carbide drawing dies used for ferrous metal wires can reduce the cross section of ferrous metal wires by pulling them through holes on draw plates. There are many applications for carbide wire drawing dies, including manufacturing electrical wires, cables, springs, paper clips, strings in musical instruments, wheel spokes, etc. Drawing process is usually performed at room temperature, but sometimes it needs to be performed at elevated temperature when stretching large wires. R5 carbide drawing dies used for ferrous metal wires are commonly applied in steel industry, metal industry, and so on.

Features

1. To choose right R5 carbide drawing dies used for ferrous metal wires, please tell us what metal are to stretch, or which drawing die model you want before purchase.
2. 15 days are needed to manufacture specific dies if you offer physical prototypes to us. And 25 days are needed if there is no physical prototype.
3. Cargos are packaged with fiber board cases if they are transported by sea, and with cartons if by air.
4. Payment for carbide wire drawing dies is through T/T or L/C.

Parameters

New Type	Old Type	Dimension (mm)						Reference Dimension (mm)
		D	H	d	2α	2β	2γ	h	h1	H2	R	E
R5-0161512-1.2	R5-1.2	16	15	1.2	12	35	70	0.6	2.5	6.0	3.0	1.0
R5-0161512-2.4	R5-2.4	16	15	2.4	12	35	70	1.2	2.5	5.6	3.0	1.0
R5-0161512-2.5	R5-2.5	16	15	2.5	12	35	70	1.25	2.5	5.6	2.5	1.0
R5-0161512-3.1	R5-3.1	16	15	3.1	12	35	70	1.5	2.5	5.3	2.5	1.0

Founded in 1993 and with fixed assets over 38 million RMB, TallKee Cemented Carbide is a specialist manufacturer dedicated in production of superior cemented carbide dies. It can produce various carbide dies no matter they are complex in structures or irregular in shapes. Its R5 carbide drawing dies used for ferrous metal wires are exported to many countries, such as America, Germany, Spain, Japan, Korea, India, etc.