R4 Carbide Drawing Die for Metal Wires

Introduction

R4 cemented carbide dies for drawing ferrous metals are used to reduce cross section of ferrous metal wires by pulling them through special holes. Besides, cross sections of drawing metal wires can be round, square, octagon, hexagon, etc. Drawn wires are widely used as electrical wires, cables, strings in musical instruments, wheel spokes, and so on. As a specialist widia die manufacturer, TallKee Cemented Carbide offers a wide range of quality drawing dies to customers.

Features

1. R4 cemented carbide dies for drawing ferrous metals can stretch wires into thinner ones whose diameter ranges from 2 mm to 5 mm.
2. Widia wire drawing dies are featured by good wear resistance, strong toughness, long working life and high cost performance ratio.
3. As professional widia die manufacturer, we can produce custom wire drawing dies according to parameters or design drawings provided by clients.

Notes and Delivery

1. Please let us know what drawing die model you want, or what metal material are to stretch. Then, we can help you choose suitable R4 cemented carbide dies for drawing ferrous metals.
2. Production time is 15 days for custom widia die which has physical prototype for reference. And it is 25 days if there is no physical prototype.
3. Cargos are packaged in fiber board cases if they are delivered by sea, or in cartons if delivered by air.
4. Payment is through T/T or L/C.

Parameters

New Type	Old Type	Dimension (mm)						Reference Dimension (mm)
		D	H	d	D1	2α	2γ	h	h1	R	e	Ε
R4-0121112-2.2	R4-2.2-12	12.7	11.4	2.2	10.0	12	90	1.2	2.0	5.0	1.0	45
R4-0121112-2.4	R4-2.4-12	12.7	11.4	2.4	10.0	12	90	1.2	2.0	5.0	1.0	45
R4-0121112-2.6	R4-2.6-12	12.7	11.4	2.6	10.0	12	90	1.2	2.0	5.0	1.0	45
R4-0121112-2.8	R4-2.8-12	12.7	11.4	2.8	10.0	12	90	1.2	2.0	5.0	1.0	45
R4-0121112-3.0	R4-3.0-12	12.7	11.4	3.0	10.0	12	90	1.4	2.0	5.5	1.0	45
R4-0121112-3.2	R4-3.2-12	12.7	11.4	3.2	10.0	12	90	1.4	2.0	5.5	1.0	45
R4-0121112-3.4	R4-3.4-12	12.7	11.4	3.4	10.0	12	90	1.4	2.0	5.5	1.0	45
R4-0121112-3.6	R4-3.6-12	12.7	11.4	3.6	10.0	12	90	1.4	2.0	5.5	1.0	45
R4-0121112-3.8	R4-3.8-12	12.7	11.4	3.8	10.0	12	90	1.4	2.0	5.5	1.0	45

TallKee Cemented Carbide was founded in 1993. It is specialized in production of superior tungsten carbide dies. Our products, including R4 cemented carbide dies for drawing ferrous metals, are inspected under strict quality tests. They have passed ISO9001:2000 and are exported to many areas, including North American countries, Japan, Korea, India, Taiwan, Southeast Asia, etc.