Tungsten Carbide Bar Drawing Dies

Introduction

Tungsten carbide drawing dies for rods are employed to reduce cross section of metal rods by pulling these rods through drawing plates. They are widely used in metalworking process and at room temperature. But sometimes, they are performed at elevated temperature when drawing large rods. Cemented carbide drawing dies for rods are commonly applied in steel industry, metal industry, electronics industry, etc. We offer several types of products to customers, including S13, LE, S41, S42, S60, etc.

Features

1. In S13 tungsten carbide drawing dies for rods, maximum external diameter is 250 mm, diameter of sizing area ranges from 4.0 mm to 92.5 mm.
2. In LE type, maximum external diameter is 120 mm. Diameter of sizing area is 5.0 mm to 60 mm.
3. Cemented carbide drawing dies for square rods have maximum diameter of 120 mm. Diameter of sizing area ranges from 1.8 mm to 55 mm.
4. Maximum diameter of S41 cemented carbide rod drawing dies is 60 mm.
5. S42 tungsten carbide drawing dies for rods can be manufactured by parameters provided by customers.
6. Maximum external diameter of S60 drawing dies is 120 mm.
7. Tungsten carbide drawing dies feature fast drawing process, high thermal conductivity, superior erosion resistance, long working life and high cost performance ratio.
8. Good wear resistance assures high accuracy in continuous working process.
9. Excellent polishing guarantees surface of drawn metal rods is in high quality.
10. Adhesion between metal rods and tungsten carbide drawing dies for rods is small. Then, surface of drawn rods is glossy.
11. With small friction coefficient, cemented carbide rod drawing dies can save electric power and increase efficiency.

Notes and Delivery

1. Please tell us drawing die types you want, or what materials are to stretch, so that we can help you choose right tungsten carbide drawing dies for rods.
2. With physical prototypes, custom drawing dies can be manufactured in 15 days. But if there is no physical prototype for reference, 25 days are needed.
3. Cargos are packaged with fiber board cases if they are transported by ship, and are packaged with cartons if by air.
4. Payment is though T/T or L/C.

Founded in 1993 and with fixed assets over 38 million RMB, TallKee Cemented Carbide is a specialist manufacturer dedicated in production of superior cemented carbide dies, including tungsten carbide drawing dies for rods. Our products are inspected under strict quality tests and have passed ISO9001:2000. In 2008, our annual productivity of cemented carbide materials reached up to 300 T, and, sale amount of drawing dies was over 100 T. Our products are exported to America, Germany, Spain, India, Korea, Japan, Malaysia, etc.